A practical guide to drone photography permits at Harper Court
Harper Court is a large-scale commercial redevelopment in Chicago’s Hyde Park neighbourhood, with more than one million square feet of retail, hospitality and commercial space planned around a mixed-use public realm. Aerial imagery can reveal the scale, landscaping and construction progress of the project. It can also support leasing campaigns, tenant announcements and hospitality marketing. For those uses, drone photography at Harper Court is a location-production exercise, not simply a camera trip.
The permission stack has several layers. Federal aviation rules govern the flight; the landowner controls access to private property; and city or agency permissions may apply when the route touches public space. A photographer with a valid Australian remote pilot qualification still needs US authorisation, and a US operator may also need several separate approvals. Treating drone permits as one city-issued document is a common and costly mistake.
Start before the aircraft is booked. The project team should establish whether the images are for editorial use, tenant marketing, a sales brochure or a full commercial production, since an elevated camera can change the risk profile and the owner’s insurance expectations. Weather, construction activity and tenant access can also affect the filming window. A useful approach is to build a primary date and a realistic alternative rather than a nominal one-day schedule.
For Australian teams, the operational challenge is divided between two regulatory systems. The Civil Aviation Safety Authority governs flights in Australia; the Federal Aviation Administration governs the flight in Chicago. An Australian accreditation does not replace FAA certification, and FAA approval does not satisfy CASA requirements for any photography completed in Australia. Harper Court’s scale makes advance coordination worthwhile, particularly when the same campaign team is working across Sydney, Melbourne or a US production office.
Where FAA and city rules begin
A small drone flown for compensation or hire generally falls under FAA Part 107 and requires the responsible remote pilot to hold a Remote Pilot Certificate, unless a separate FAA certificate covers the operation. Recreational exceptions are not a shortcut for commercial imagery at a redevelopment. Aircraft registration and other requirements depend on the drone and the operation. The remote pilot must also satisfy operating rules covering visual line of sight, maximum altitude, airspace and operations over people.
Chicago places the project within a complex airspace environment, particularly near Midway Airport and other controlled facilities. Pilots should check the FAA’s current UAS Facility Maps and DroneZone, not rely on a consumer app or an old mission plan. Where a flight would enter controlled airspace, the operator may need a LAANC authorisation, a specific airspace authorisation or a waiver. The correct instrument and approval altitude depend on the actual coordinates and aircraft category.
Some operations fall outside standard Part 107 privileges. Night flights, flight beyond visual line of sight and certain operations over people or moving vehicles generally require a waiver and supporting risk documentation. Waivers are not automatic and are not a substitute for controlling the site. If the campaign only needs daylight images of the exterior, designing the shoot within routine Part 107 limits can reduce cost and delay.
Property access and local filming approvals
Landlord approval is separate from aviation approval. The request should identify the Harper Court addresses involved, proposed take-off and landing points, flight path, aircraft, operator, dates, insurance and whether crew will enter a building, parking area or construction zone. Harper Court’s tenant leasing insights offer a useful reminder that site coordination is broader than finding an attractive façade: deliveries, fit-outs and public events can affect access on the chosen day.
Chicago’s Film Office may require a permit when commercial filming occupies streets, sidewalks or other public rights-of-way. Separate permission may be needed from the Chicago Park District, the Illinois Department of Transportation, CTA or another agency, depending on the location. These approvals have different triggers and schedules. A tenant cannot grant access to a public road, and an FAA certificate does not authorise filming from a public sidewalk. Confirm the boundary of each parcel and the flight route before positioning the aircraft.
Some sites may also require a property-specific drone policy, an escort, a construction safety induction or proof that a rooftop launch point can safely support the operation. Rooftops need a separate engineering and fall-protection assessment; a clear roof is not an approved helipad. If a person, vehicle or active works area appears in frame, the operator should assess overflight restrictions and coordinate with the general contractor rather than rely on verbal permission from a site contact.
Operating safely around Chicago
A clear flight path is not enough for a busy commercial environment. The crew should survey pedestrians, cyclists, vehicles, rooftop equipment, temporary structures and nearby trees. Wind around towers can be stronger and less predictable than ground-level forecasts. A spotter who can communicate with the remote pilot is valuable, especially where the take-off point is outside the pilot’s direct view. The operating area also needs enough separation from people for the selected Part 107 operation.
Privacy and visual rights need their own checklist. Public visibility is not the same as consent to use an identifiable person’s image in advertising. Avoid capturing close, recognisable faces, private interiors and licence plates unless the production has an appropriate release. Illinois’ restrictions on certain biometric uses also deserve specialist advice if the imagery will be analysed or repurposed. Model releases, tenant notices and a shot list can prevent disputes over advertising material.
Insurance should be arranged before crew travel is confirmed. The FAA generally does not require liability insurance for a Part 107 flight, but a property owner, construction contractor or production company can impose higher standards. Ask for commercial general liability, aircraft coverage and workers’ compensation as appropriate. If the operator is self-employed, check policy wording, additional insured status, limits and whether both drone operations and rooftop work are covered.
Australian teams and cross-border logistics
Australian operators should separate their home aviation duties from the Chicago operation. A CASA-registered drone used for commercial work may require operator accreditation and a remote operator certificate, depending on the operation and payload. Work over people or other higher-risk situations can change those obligations. A company paying an Australian pilot to capture images is not automatically conducting a private recreational flight, even if the footage supports a property campaign.
Local approvals in Australia can be just as important. Councils in Melbourne and Sydney impose their own requirements for drone activity and filming, while airspace restrictions around Brisbane Airport and RAAF bases in Perth can affect route selection. Camera and privacy rules may continue to apply after a flight has met aviation requirements. For any Australian location work, check the relevant council, CASA guidance and privacy obligations rather than transferring a Chicago approval into a local production plan.
Equipment logistics also cross two customs systems. For gear hired in Australia, check the temporary export rules, including whether an export permit or carnet applies, then declare the equipment accurately to US Customs and Border Protection on arrival. Have the carrier confirm lithium-battery handling for spare batteries and equipment freight. Budget permits, insurance, accommodation and travel in Australian dollars while checking applicable US tax withholding and cross-border coverage. The practical advice on coordinating a move-in date is equally relevant to a shoot: a booked crew, approved aircraft and accessible site must converge on the same calendar day.
Comparing routes and securing final approvals
No single approval proves that a shoot is ready. The owner’s access agreement confirms permission to use the site; FAA permissions cover the flight; public-space and agency approvals cover filming conditions; and insurance documents the risk allocation. The comparison below separates common routes so a producer can see which work applies. A proposal should explain the proposed flight, rather than asking simply whether a drone permit is available.
Build the approval schedule backwards from the shoot date. Allow time for FAA certification or a waiver, airspace authorisation, landlord review, public-space permits, insurance binders and tenant notifications. Keep each approval attached to a named owner and a dated condition. If a shot can be achieved from public ground with a conventional camera, preserve it as a fallback rather than letting the entire campaign depend on flight clearance.
- Appoint a US-qualified remote pilot and confirm whether the aircraft, payload and operation fall within Part 107 or require a waiver.
- Secure written property access with take-off, landing and flight-path details, including rooftop, construction and tenant restrictions.
- Map controlled airspace using official FAA tools and obtain the applicable authorisation for the exact site and operating window.
- Prepare Australian export documents, US entry declarations and carrier-approved battery arrangements before travelling with equipment.
- Issue a single production pack containing approvals, insurance certificates, risk assessment, emergency contacts and the approved shot list.
| Approval or route | When it applies | Authority or provider | Record to keep |
|---|---|---|---|
| Remote Pilot Certificate | A small drone flown for commercial work under Part 107 | FAA | Certificate and responsible pilot’s details |
| Airspace authorisation | The proposed route enters controlled airspace | FAA through DroneZone or the relevant authorisation process | Coordinates, altitude, time limits and written approval |
| Part 107 waiver | Night, beyond-visual-line-of-sight or covered overflight operations | FAA | Approved waiver and supporting operational risk documentation |
| Property access agreement | Take-off, landing, buildings, roofs or landscaped areas are used | Harper Court property team and affected tenants | Written consent, dates, site contact and access conditions |
| Public filming permission | Streets, sidewalks, parks or other agency land are involved | Film Office, Park District, IDOT, CTA or relevant authority | Permit number and attached operating conditions |
| Insurance and safety approval | The owner, contractor or production company imposes requirements | Insurer, general contractor and producer | Certificates, policy wording, risk assessment and inductions |
Ready to turn the project’s scale into a clear set of images? Contact the Harper Court leasing team to confirm the current site contact, access arrangements and suitable filming dates. Provide the proposed aircraft, operator, locations and operating window, then request the property and agency approvals required for that plan. Submit those details to the leasing team and secure a confirmed filming window before committing the production schedule.